Fig. 25 Insert Control Panel
Option 2 - Mounting of Whale Duo Control Panel
The Whale Duo Control Panel requires a cut out 118mm wide x 64mm high. Feed the wires through the cut out in the
wall and locate into desired position. Secure with 2 screws (No.4 x
In some instances, it may be necessary to make the wiring connections in Step 11 before securing the Whale Duo
Control Panel to the wall.
Step 11 Electrical Connections 12V d.c.
Vehicle Manufacturer Installation - SH2212B
WARNING: Always disconnect the appliance from the power supply prior to working on electrical components.
The Space Heater and both the Whale Space Heater Control Panel and the Whale Duo Control Panel come
complete with electrical connectors fitted.
The Whale® Space Heater and Control Panels are designed to be integrated into the caravan's wiring loom. The
Space Heater is provided with a JST VL series 12 way socket, and the Control Panel with JST VL 6 and 3 way
sockets. 9 wires are required to connect the Space Heater to the Control Panel, and 12V d.c. and 0V d.c. power
supply must be connected to the 12 way socket at the Space Heater.
Please note: Whale recommends that a 5 amp automotive fuse is fitted in the 12V d.c. supply.
Mounting Frame
Cut Out
Fig. 26 Secure Control Panel
Table 1: Connections at Space Heater
Terminal Number
Description
1
Switch common
2
0V to Switch panel
3
Fan Switch
4
Electric 1 Switch
5
Electric 2 Switch
6
Electric 3 Switch
7
Burner Switch
8
Burner LED
9
Lockout LED
10
12V supply
11
0V supply
Table 2: Connections at Control Panel
Terminal
Connector
Number
1
2
3
6 Way
connector
4
5
6
1
3 Way
2
connector
3
15
Surround Frame
3
⁄
") provided, then clip on the Surround Frame.
4
Wire Colour
Brown
Black
Yellow
Green
Grey
Pink
Blue
Orange
Violet
Red
White
Description
Wire Colour
Switch common
Burner Switch
Fan Switch
0V to Switch panel
Burner LED
Orange
Lockout LED
Electric 1 Switch
Electric 1 Switch
Electric 1 Switch
Fig. 27 Installed Control Panel
Brown
Blue
Yellow
Black
Violet
Green
Grey
Pink