Zodiac Security ZS-10A Manual De Instrucciones página 22

When the alarm panel receives the signal, the siren beeps once and the Arm
indicator on the control panel lights up. The alarm system is now armed.
Default Admin code: 123456. Default user code: 1234
Disarming the system with the keypad
1. Press Arm [ ] or Home Mode [ ] keyon the
keypad to unlock it.
2. Type your user code or admin code.
3. Press the Disarm button [ ]. The LED indicator
blinks once, the keypad beeps once and sends to
the control panel the signal to disarm the system.
When the control panel receives the signal, the siren beeps twice and the
Disarm indicator lights up: the alarm system is now disarmed.
Disarming by RFID tag
1. Press Arm [ ] or Home Mode [ ] key on
the keypad to unlock it.
2. Press [*] to activate the RFID reader for 10
seconds.
3. Within the next 10 seconds, swipe the RFID
tag in front of the reader to disarm the system.
The RFID reader turns off when a RFID tag is swiped in front of it, when the key [*] is
pressed again on the keypad, or after 10 seconds without operation.
Home Mode
1. Press Arm [ ] or Home Mode [ ] key on the
keypad to unlock it.
2. Type your user code or admin code.
3. Press the [ ] key. the LED indicator blinks once,
the keypad beeps once and sends the signal to the
control panel to switch to Home Mode.
When the alarm panel receives the signal, the siren beeps once and the Home
Mode indicator lights up: the alarm system is now in Home Mode.
All the sensors in regular zones are armed except those in the Home Mode zone.
The sensors in the Home Mode zone are disarmed so that user can move inside
their home.