Ecolab Foamatic Mainstation S-version Guía De Servicio página 12

1.2.El diagram S2
2. Maintenance
in general the Foamatic unit is maintenance free, as it consists of only a few moving parts.
However, to ensure optimum operation it is very important to maintain both pump and
compressor.
Always make sure that no valves, pipes or hose connections are leaking. In order to achieve
optimum suction from the containers, please make sure that all clamps are correctly mounted
and secured. Last but not least check filters in the end of the suction hoses.
In order to keep a high level of hygiene the Foamatic cabinet should be cleaned with clean
water both inside and outside. If the unit is very filthy we recommend using a mild detergent.
For further information, please con‐tact your Ecolab service department.
The outer side of the cabinet can be rinsed with clean water. In order to avoid damages to the
controller and other electric parts, we recommend using a cloth or a sponge to clean the inside of
the cabinet. Cleaning with running water inside the cabinet should only be done in the lower
part of the cabinet.
11