To Clean The Cooling System; To Examine The Spark Plug; Air Filter; To Clean The Air Filter - RedMax BCZ3050S Manual Del Usuario

Ocultar thumbs Ver también para BCZ3050S:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: The spark arrestor screen must
be replaced if it is damaged. Do not use a
product without, or with a broken, spark
arrestor screen if you must have a spark
arrestor screen in your area. Obey local
regulations and maintenance instructions.
CAUTION: If the spark arrestor screen is
frequently blocked it can be a sign that the
performance of the catalytic converter is
decreased. Turn to your servicing dealer to
examine the muffler. A blocked spark
arrestor screen will cause overheating and
result in damage to the cylinder and piston.

To clean the cooling system

The product has a cooling system to keep the operation
temperature as low as possible.
CAUTION: A dirty or blocked cooling system
makes the product too hot which causes
damage to the piston and cylinder.
The cooling system has the components that follow:
Air intake on the starter.
Flywheel fins on the flywheel.
Cooling fins on the cylinder.
Cylinder cover (points cool air over the cylinder).
Muffler cover.
Muffler plate.
Clean the components of the cooling system with a
brush weekly or more frequently in rougher
conditions.

To examine the spark plug

CAUTION: Always use the recommended
spark plug type. Incorrect spark plug type
can cause damage to the product.
Examine the spark plug if the engine is low on
power, is not easy to start or does not operate
correctly at idle speed.
To decrease the risk of unwanted material on the
spark plug electrodes, obey these instructions:
a) Make sure that the idle speed is correctly
adjusted.
b) Make sure that the fuel mixture is correct.
c) Make sure that the air filter is clean.
14
If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, refer to
on page 17 .
Replace the spark plug if it is necessary.

Air filter

Remove dust and dirt from the air filter to keep it clean
and prevent these problems:
Carburetor malfunctions.
Problems when you start the product.
Loss of engine power.
Increased wear to engine parts.
Too much fuel consumption.

To clean the air filter

CAUTION: An air filter that is damaged, very
dirty or soaked with fuel must always be
replaced.
If you use an air filter for a long time it cannot be fully
cleaned. Replace the air filter with a new one at regular
intervals.
1. Move the choke up to close the choke valve.
2. Remove the air filter cover and remove the air filter.
Technical data
1561 - 003 - 05.10.2020

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bcz3050swBcz3060ts

Tabla de contenido