2 Safety
2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and are shown prior to
potentially dangerous work steps. Arranged in descending order of importance, they have the following
meaning:
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical
injuries.
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.
2.5 Warning and notice signs
The following warning and notice signs can be found on the product:
Symbol
These markings must always be legible. They must not be covered, obscured, painted over or removed.
2.6 Emergency information
In case of emergency, immediately disconnect the following supplies:
• Power: mains plug
Further measures can be found in the "Power source" operating instructions or in the documentation for other
peripheral devices.
EN - 4
DANGER
WARNING
CAUTION
Meaning
Read and observe operating instructions!
CR1000/CR1250