Klip Xtreme MagnoPro KLS-901 Manual Del Usuario página 6

Microphone
Connectivity
Directivity
Frequency
Speaker
Impedance
Sensitivity
Connectivity
Connection type
Wireless RF frequency
Wireless range
Audio input
Additional inputs
Battery
Type
Charging time
Run time
Standby time
Battery charging method
Additional information
Dimensions (L, W, H)
Weight
Cable length
Warranty
Highlighted features
Lighting effect
Handles
Display
Tuner
Power bank
Equalizer
Microphone effects
Precautions
• Do NOT use this unit for anything other than its intended use.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long periods of time.
• Do NOT expose the speaker to rain or water, and avoid environments with high humidity or dust.
• Do NOT disassemble, repair or modify the speaker yourself. There are no user serviceable parts inside the
unit. Only qualified personnel should be allowed to perform repairs without voiding the warranty.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT use near a microwave oven or wireless LAN products.
• Do NOT place containers with liquid on top or near the speaker.
• Do NOT place objects which are sources of heat on the speaker cabinet such as lighting equipment or
smoke machines.
• Do NOT stack the speaker cabinet in a manner that could cause injury should a cabinet become dislodged.
Wireless (included) and wired compatible
Unidirectional
50Hz-13kHz±3dB
600
125dB(-95dbm)
V5.0 compatible
®
Bluetooth
2.4GHz-2.480GHz
98ft (linear with no interference)
AUX 3.5mm stereo, USB and MicroSD
TM
Two ¼in mic/guitar inputs
12VDC/7A Lithium battery
10 hours
5.5 hours at 75% volume, 9 hours at 50% volume
24 hours
Direct charger
15.7x15.7x46.4in
48.5lb
3.2ft
One year
LED (On/off capability)
Yes
LED
Built-in FM antenna
Yes, through USB output (with unit in ON position)
6-channel graphic equalizer
Echo adjustment
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.