Error Code Displays; Specifications - Royal Sovereign RBC-1003BK Manual Del Propietário

eRRoR CoDe DISPLAY
When an error code appears in the preset display window and the machine stops, please refer to the following chart for an explanation.
error code
E01
E02
E03
E04
E05
E06
E07
E08
EA0
EA1
EA2
EA3
EC4
If you are receiving error codes E01-E08 check the machine for dust. If you continue to receive error codes, please
contact Royal Sovereign's Service Center at 1-800-397-1025.

SPeCIFICAtIonS

Model
Power
Power consumption
Surroundings temperature of usage
Counting speed
Note-feeding size
Display range
Cubage
Net Weight
Left counting sensor
Right counting sensor
Left double-notes sensor
Right double-notes sensor
Note-receiving sensor
Note-feeding sensor
Width sensor
UV sensor
Half sheet. Eliminate the note. Press RESTART and count continuously.
Different width or different version notes. Press RESTART and count continuously.
Double-notes. Put the notes from the stacker onto the hopper again, press RESTART to count
again. If EA2 often appears, please adjust the position of the bill thickness adjuster.
Joined notes. Put the notes from the stacker onto the hopper again, press RESTART to count again.
UV Fake note or questionable note. Eliminate this note, press RESTART and count continuously.
single-phase 100~240V 50/60Hz(1±5%)
<50W
32~104°F / 0~40°C
1200pcs/min.
4.3˝ × 2.0˝ ~ 9.8˝ × 7.7˝ / 110 × 50~185 × 90(mm)
four digits counting display, three digits preset display
10.6˝ × 9.8"˝ × 7.7" / 270 × 250 × 195(mm)
10.1 lbs / 4.6kg
11
RBC-1003BK
Reason
RBC-1003BK