Operation; Standby State - Vissani QR814 Manual Del Usario

Operation

STANDBY STATE

- Once the range hood is powered it remains in a stand
by state .
TURN ON FAN
- Press the power button (1) to quickly activate both
the fan and light at once. Press the + button (3) and -
button (4) to control fan speed .
- Alternatively you can press the fan button (2) to activate
the fan only .
TURNING OFF FAN
- Press the fan button (2) or the power button (1) while
the fan is operating to deactivate it .
QR814
Fig. 12
TIMER DELAYED SHUTDOWN
- You can set a custom shut down delay time by pressing
the time button (5) and adjusting the timer using the +
and - buttons.
TWO LEVEL LIGHTING
- Press the light button (6) at anytime to activate the light
at low level . Press the light button (6) a second time to
set the light to high level . Press the light button (6) a
third time to turn it off .
SETTING THE CLOCK
- Press and hold the time button (5) until the display starts
flashing. Press the + and - buttons to set the correct time.
Press the time button (5) again to set desired time .
12