Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Features
Power Strip* (PDU3V602D354, PDU3V602D354A, PDU3V602D354B)
2
10
9
* PDU3V602D354B model shown. Appearance may vary by model.
ATS Automatic Transfer Switch
(PDU360AT6G60)
10
3
1
Power Strip Outlets: These single-phase IEC C13 and C19 outlets receive power from the
interlaced 3-phase power input connections of Source A or Source B of the ATS. These
outlets are not controllable.
2
Power Strip Input Power Cords: The 7-conductor plugs
contain an 8-position connector that attaches directly to the
ATS.
3
ATS Source A and Source B Input: The cords are permanently
attached to the ATS and have IEC 309 60A Blue (3P + E)
plugs.
4
Digital Display: Shows source status, measured values, display
modes and other information. See the Digital Display section
for detailed explanations of the indicators and displays.
5
SNMP Reset Button: Press the reset button for 3 seconds to
reboot the ATS network card. Rebooting the network card will
not erase network settings or interrupt AC power. The reset
button is recessed. Use a paper clip or other suitable object to
press it.
16-01-031-933588.indb 6
1
4
11
11
6
9
5
12
6
7
IEC 309 60A Blue (3P + E)
8
3/22/2016 4:14:19 PM
Publicidad
Tabla de contenido
