Bowl Mounting; Strainer And P-Trap - Bradley Verge LVLD Serie Manual Del Usuario

Installation
6
Bowl Mounting (to Frame and Wall)
Secure the bowl to the
wall using the 1" O.D.
B
flat washers (supplied by
Bradley), 3/8" fasteners
and 3/8" anchors
(supplied by installer).
C
Check to be sure the
basin is level.
Press firmly on the back of
the bowl to seat the bowl
A
into the frame.
Tighten the top screw on
the frame.
7

Strainer and P-Trap

Strainer
Bradley • 215-1777 Rev. F; ECN 16-08-008
Attach the strainer screw
A
to the strainer. Do not
overtighten.
Thread the strainer screw
B
through the boss on the
drain adapter and secure
the strainer to the bowl.
6/2/2016
LVLD1
Washer
1/4"-20
Screw
11