Bowl Mounting With Washbar; Install P-Trap - Bradley Verge LVQ Serie Manual Del Usuario

LVQD1
6
Bowl Mounting with WashBar (to Bracket & Wall)
WARNING Ensure bowl is completely
seated in the wall bracket
and securely fastened to
the wall at point A.
CAUTION Bracket is not intended to
support the weight of bowl
for an extended period of
time. Be sure to secure
the bowl to the wall using
appropriate fasteners.
7

Install P-Trap

Drain Adapter
16
Position bowl above wall bracket.
A
Press firmly on the back of the bowl
to seat the bowl flange into the wall
bracket lip. Ensure bowl is level.
P-Trap
1/21/2021
Secure the bowl to the wall anchors
B
using fasteners per the structural
rough-in requirement (supplied by
installer).
Bradley • 215-1842 Rev. H: ECO 20-08-028B
Installation