ENGLISH
FUNCTIONS (FRONT)
1. COLOR / CHASE BUTTONS: These buttons have different functions, depending on the selected
working mode (refer to n°2):
FIXED COLOR MODE: You can select 9 different predefined colors.
CHASE 2: You can select 8 different chases and a random chase. (sound activated or not)
AUTO ADDRESS MODE: You can determine the order of succession of the connected LED PAR-
projectors. Refer to the chapter "ADDRESSING" for more information.
2. MODE SELECT BUTTONS: 3 buttons used to set the controller in different working modes:
FIXED COLORS: select this mode if you want to use the "fixed color" buttons (1).
CHASE MODE: used to select two different chase modes:
CHASE 1: select this mode if you want to select one of the 12 color chases using the
"chase/color" fader (3). In Chase1 mode the yellow LED is lit.
CHASE 2: select this mode if you want to use the controller as a 4 or 8 channel DJ light
modulator. You can use the "color / chase buttons" (see n°1) to select the different chases.
In Chase2 mode the yellow LED blinks.
SPECTRUM MIX: select this mode if you want to select one of the 32 different colors using the
"chase/color" fader (3).
3. CHASE/COLOR FADER: used to select one of the available color chases:
Left side of the fader indicates the different chases.
Right side of the fader indicates the different colors.
Important remark: There's also a function called "color fade" which is very nice for "background
lighting" applications. Select this function to fade gently from one color to another. You can adjust
the fade-over time with the color-fade fader(4).
4. SPEED/FADE FADER: used to select the chase speed or color fade time:
Left side of the fader indicates the chase speed, ranging from 2,5s to 0,1s.
In "fixed color" mode you can adjust the fade-over time between 2 colors from 2,5s to 0,1s.
Right side of the fader indicates the color fade time, ranging from 12s to 2,5s.
5. MASTER FADER: used to control the overall dimming of the LEDs and overall strobe speed.
6. SOUND BUTTON: used to toggle the chase mode between sound and static mode. Press this button
during the "auto address" mode to select the previous projector. Refer to the chapter "ADDRESSING" for
more information.
7. FULL ON BUTTON: used to set the 3 colors (R+G+B) at maximum level. Press this button during the
"auto address" mode to select the next projector. Refer to the chapter "ADDRESSING" for more
information.
8. BLACKOUT BUTTON: used to set the 3 colors (R+G+B) at zero level. Press this button for about
5seconds to start the "automatic address" function. Refer to the chapter "ADDRESSING" for more
information.
JB SYSTEMS
®
3/39
OPERATION MANUAL
LEDCON-02 Mk2