Troubleshooting - Lanaform TS1 Manual De Instrucciones

TROUBLESHOOTING

EN
Status
No display after pressing
the Start/Stop button
Replace battery symbol
The usage time is
reduced.
No reading after the
measurement.
Measurement
results questionable.
Measurement above
or below the average
measurement of the user.
10 Version 01 of 04/10/2010
Cause
The batteries are not
placed.
The voltage of the
batteries is extremely
low.
The voltage of the
batteries is extremely
low.
Battery performance
can be reduced by cool
weather.
This could be the result
of using non-alkaline
batteries.
The voltage of the
batteries is extremely
low.
This could be due to
poor positioning during
measurement.
Blood pressure naturally
varies from time to
time.
Corrective Action
Insert the batteries
correctly.
Replace the four batteries
with new ones.
Replace the four batteries
with new ones.
Warm the batteries with
your hands or place them
in a warm place for a
while, then restart the
machine.
Try using alkaline
batteries.
Replace the four batteries
with new ones.
Adopt a correct position
for measurement.
1. Sit on a chair with your
feet on the ground and
your arm resting on a
table so that the sleeve
is at the same level as
your heart.
2. Relax your arm and
turn your palm up.
3. Make sure the air hose
is not twisted.