Honeywell HWM705 Serie Manual Del Usuario página 3

SETTING UP YOUR HUMIDIFIER
1. Remove humidifier and all contents from box. Save Use and Care Manual for future use.
Recycle packaging materials or save for storage.
Step 1
2. Remove twist tie from power cord and extend power cord full length. Do not operate with
power cord coiled or twist tie in place.
3-4. Ensure proper assembly. Make sure Cooling Chamber and
Removable Tray are securely in place and the Locking Tab is engaged.
5. Select a firm, level location at least 12" (30cm) from any walls.
Place the humidifier on a water-resistant surface.
Steam should be directed away from any walls, bedding or furniture.
Kaz will not accept responsibility for property damage caused by water spillage.
WARNING: KEEP OUT OF REACH OF CHILDREN AND PETS.
This product produces HOT STEAM and should be placed in an area not accessible to children
or pets. Ensure the power cord is also securely out of reach.
FILLING/REFILLING
RESET:
When your humidifier is out of water the refill light will illuminate.
Turn off and unplug the humidifier, and wait 20-30 mins until unit
cools down.
Step 1
1. Remove Water Tank by grasping the Top Tank Handle and pulling up. Remove Tank Cap
located on bottom of Water Tank by turning counter clockwise.
2. Fill Water Tank with cool water. Do not fill with warm or hot water.
3. Replace Tank Cap by turning clockwise to lock back in place. Do not over tighten.
Place Water Tank back on humidifier Base and turn humidifier on.
NOTE: The Water Tank should be carried using two hands: one handing holding the Top Tank
Handle and the other holding the Bottom Tank Handle.
Step 2
Step 2
Step 3
Step 3
Step 4
Step 5
and
Refill Light
3