Troubleshooting - Silverline 344944 Manual De Instrucciones

GB
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly,
and shorten the machine's service life. Clean the body of your machine with a soft
brush, or dry cloth. If available, use clean, dry, compressed air to blow through the
ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do not use alcohol,
petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Brushes
• Over time the carbon brushes inside the motor may become worn
• Excessively worn brushes may cause loss of power, intermittent failure, or visible
sparking
• If you suspect that the brushes may be worn, have them replaced at an authorised
Silverline service centre

Troubleshooting

Problem
No function when On/Off Switch Box
(9) is operated
Motor does not start
Poor surface finish after planing
Barrel not rotating
Vibration and abnormal noise
10
Possible cause
No power
Defective On/Off Switch Box
Carbon brushes worn
Chosen cutting depth too big
Blunt blades
Wood is damp
Broken drive belt
STOP using tool immediately
Storage
• When storing, always cover the Blade Drum (3) using the Blade Cover (25)
• Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic equipment
(WEEE), with household waste
• Contact your local waste disposal authority for information on the correct way to
dispose of power tools
Solution
Check power supply
Replace the On/Off Switch Box at an authorised Silverline service centre
Brushes need replacing
Reduce cutting depth and work in several passes instead
Turn or replace blades (see 'Changing blades')
Switch off immediately. Evaluate and correct positioning of blades
(see 'Blade replacement')
See 'Drive belt replacement' and replace belt
Re-check all user accessible parts are secure and correctly fitted
contact an authorised Silverline service centre