Nordson Encore LT Manual De Producto Del Cliente página 94

8 7
NOTICE
THIS DRAWING IS NORDSON PROPERTY,CONTAINS PROPRIETARY INFORMATION AND MUST BE RETURNED UPON REQUEST.
DO NOT CIRCULATE, REPRODUCE OR DIVULGE TO OTHER PARTIES WITHOUT WRITTEN CONSENT OF NORDSON.
D
C
ENCORE 115V & 220V VBF
MOBILE POWDER SYSTEMS
1107897 OR 1107898
B
HEIGHT: 995 mm [35.2 in]
LENGTH: 820 mm [32.25 in]
WHEEL BASE: 598.5 mm [23.5 in]
WEIGHT: 46.7 kg [103 lbs]
A
8 7
6 5
ENCORE 50LB HOPPER
MOBILE POWDER SYSTEM
1107901
HEIGHT: 995 mm [35.2 in]
LENGTH: 812 mm [32 in]
WHEEL BASE: 598.5 mm [23.5 in] APPROVED EQUIPMENT FOR THE FOLLOWING
WEIGHT: 50.4 kg [111 lbs]
THE FOLLOWING CONTROLLER IS
SUITABLE FOR CLASS II, DIV 2, GROUP F & G
HAZARDOUS (CLASSIFIED) LOCATIONS OR
THE APPLICATOR AND CABLES
OF THESE UNITS ARE SUITABLE FOR
IN A CLASS II, DIV 1, GROUP F & G HAZARDOUS
(CLASSIFIED) LOCATION OR ZONE 21 (EU):
5
6
4
03 115V VIBRATOR MOTOR 1604512
230V VIBRATOR MOTOR 1108091
WITH EXTRA-HARD USAGE ELECTRICAL CORD
UL/CSA APPROVED 18 AWG 90 C
230V = VIBRATOR MANUFACTURER'S CERT. #: TUV12ATEX094817
04
115V = VIBRATOR MANUFACTURER'S CERT. #: ETL CERTIFIED US & CANADA
PART NUMBER
1107897 SYSTEM,DOLLY W/VBF,115V,ENCORE LT
1107898 SYSTEM,DOLLY W/VBF,220V,ENCORE LT
MOBILE POWDER SYSTEMS:
1107901 SYSTEM,DOLLY W/HOPPER,ENCORE LT
1107552 CONTROL UNIT,MANUAL,ENCORE LT,PKGD
ZONE 22 (EU):
1106893 HANDGUN ASSY,ENCORE LT
01 1106756 CABLE ASSY,HANDGUN,ENCORE LT/XT,6M
1085168 CABLE,6-WIRE SHIELDED,HANDGUN,6M EXT
4
MATERIAL NO. REVISION
1107255 04
3
6M MANUAL GUN CABLE EXTENSION,
6-CONDUCTOR, SHIELDED.
1085168
ATEX
DESCRIPTION cFMus
CRITICAL
No revisions permitted without
approval of the proper agency.
ALL DIMENSIONS IN
NORDSON CORPORATION
MM
WESTLAKE, OH, U.S.A. 44145
EXCEPT AS NOTED
DESCRIPTION
X±0.8 X.X±0.25 X.XX±0.13
REF DWG,APPROVED EQUIPMENT,MANUAL,ENCORE
1.6
MACHINED SURFACES
BREAK INSIDE/OUTSIDE CORNERS
0.1/0.8 DRAWN BY
DC
THREAD LENGTH DIMENSIONS ARE
FULL THREAD
CHECKED BY
RJF
INTERPRET DRAWINGS PER ASME
Y14.5-1994
SIZE FILE NAME
PERFECT FORM AT MMC REQUIRED
D
FOR INTERRELATED FEATURES 1107255
THIRD ANGLE
NOT TO SCALE SOLIDWORKS GENERATED DWG.
PROJECTION SCALE
3 2
1
D
C
cFMus & ATEX
B
A
DATE RELEASE NO.
07APR11
PE602493
APPROVED BY
RJF
MATERIAL NO. REVISION
1107255
04
2
2
SHEET OF
1