PHARO Lift 2 Manual De Instrucciones página 11

Spare parts (see page )
Adjustment (see page 7)
Safety Function (see page 7)
Cleaning (see page 75)
Service (see page 76)
Fault
Insufficient water
Handshower delivering insufficient water
Temperature regulation not possible (only hot or
cold water)
Shower drips continuously
Difficulties when lifting and lowering the panel
Cleaning recommendations, see enclosed brochure.
English
Cause
Filter at the isolation valves soils.
Regulator filter dirty
Shower filter seal dirty
Thermostatic cartridge defective
Connection hoses transposed during new
installation
Cartridge defective
Guide rollers stuck
Remedy
Clean filters
Clean temperature regulator, exchange if
necessary
Clean filter seal between shower and hose
Replace thermostatic cartridge
Install connection hoses properly
Exchange cartridge
Service (see page 76)
11