Descargar Imprimir esta página

Advent ADVW801 Manual De Instalación Y Operación página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

ADVW801_instructions_trilingual
1/6/04
TROUBLE
CHECKS AND ADJUSTMENTS
No Sound/Distortion/ • If using battery power, batteries may be low. Replace if necessary.
Static
• Check that the speaker Power Indicator Light (B) is illuminated red. If not, the speaker is
not receiving power from the batteries or AC adapter.
• Check that the antenna (O) is in the upright position.
• Check that the Transmitter Audio Level Indicator Light (J) is flickering intermittently.
If you are using a fixed output and the light is on solid or flickering very rapidly, or if the
light is not on at all, adjust the Output Level Control Wheel (L) so that the light flickers
intermittently.
OR
• If you are using a variable output, make sure the Output Level Control Wheel (L) is all
the way left (as shown under ADJUST THE TRANSMITTER), and adjust the volume on the
audio source up or down as neccessary to make the light flicker intermittenly.
• Change the position of the Frequency Control Wheel (N) to change the operating
frequency. Then readjust the speaker Tuning Control Knob (F) until the Tuning Indicator
Light (E) changes colour to red.
• Try changing the physical location of the transmitter. Locate it as high and free of
obstruction as possible. Avoid placing directly on top of a TV, if possible.
• Try changing the antenna (O) position, particularly if you think you may be near maximum
transmitting range.
15
ADVENT ADVW801 900 MHz Wireless Outdoor/Indoor Speaker System
4:05 PM
Page 16
• Try moving the transmitter and speaker closer
together. Sending the signal through certain
materials, such as glass, tile, and metal, can
decrease the effective transmitting distance of
the system.
ADVENT ADVW801 900 MHz Wireless Outdoor/Indoor Speaker System
16

Publicidad

loading