Philips HB 541 Manual Del Usuario página 7

General description (fig. 1, page 3)
A
Tube lamps and starters
HB 541 - 8 large tube lamps (type Philips UVA 100W
"Cleo Performance") with
8 starters (type Philips S12)
HB 542 - 10 large tube lamps (type Philips UVA 100W
"Cleo Performance") with
10 starters (type Philips S12)
HB 544 - 10 large tube lamps (type Philips UVA 100W
"Cleo Performance") with
10 starters (type Philips S12) and
4 small tube lamps (type Philips UVA 15W
"Cleo Performance") for extra face tanning
performance, with
4 starters (type Philips S2)
B
Timer
C
Stand
D
Protective eye goggles (2x)
o
(Type HB 071 / service n
E
End caps
F
Rod
G
Bolts and nuts
H
Height adjustment knob
I
Spanner
J
Mains cord
K
Castor wheels
L
Handle
M
Cooling fan
N
Vents
O
Protective shield
P
Protective plastic foil
Making the solarium ready for use
2
Fixing the stand
- With one person helping you, lay the solarium on a table top
with the lamps facing downwards (fig. 2).
Ensure that the handle does not rest on the table.
- Fix the castor wheels to the stand (fig. 3).
4
- Mount the stand to the rod (fig. 4, 5).
. 4822 690 80123)
3
5
6
1
1
2
- Lift the solarium from the table top (fig. 6).
- Remove the plastic foil from the protective shield (fig. 7).
8
You can be tanned either
lying (fig. 8),
sitting (fig. 9), or
standing (fig. 10)
with this solarium.
To make this possible, you
can adjust the height and
position of the upper casing.
• During tanning, the
distance between the
lamps and your body
should be at least 20 cm
(8").
• If you intend to tan while
lying, this means that the
distance between the
lamps and your bed, couch
or mattress should be at
least 40 cm (16") (fig. 11).
Height adjustment
- Rotate the height
adjustment knob anti-
clockwise two or three
turns to release the rod
(fig. 12).
A gas spring stabilizes the
position of the rod.
- Adjust the height of the rod
by pulling or pushing the
handle (fig. 13).
- Turn the height adjustment
knob clockwise until tight
to lock the rod (fig. 14).
13
7
7
9
10
11
20
40
12
14