Femi 404 Instrucciones Para El Uso Y Manutencion página 14

USE OF APPROPRIATE TOOLINGS
ITEM
404
150x20x16
424
150x20x16
405
200x20x16
425
200x20x16
3.4 SUCTION AND POWDERS COLLECTION
The machine is fitted with holes for discharging
the powders both from the wheels protection
caps (bench-grinders) and from the brush
protection (combined versions and polishing
machines).
It is possible to fit it with a powders suction system.
Ask your dealer the complete suction unit with all
connections and the bags for powders collection
in order to keep the working area clean and
salubrious.
4 MAINTENANCE
Normal operations of routine maintenance, which
can be also be carried out by non-skilled
personnel, are all described in the previous
paragraphs and in the present one.
In case the intervention of qualified personnel is
required for extraordinary maintenance operations,
or in case of repairs, both during guarantee periods
and afterwards, always turn to an authorized
service center, or directly to the factory if the
service center is not present in your area.
12
m m . m m
/
150x25x16
/
150x25x16
4.1 DISPOSAL OF THE MACHINE, PACKING
At the end of the machine life, if
the machine must be scraped,
contact an authorised waste
disposal centre in order to comply
with the Standards for hygiene
and environment safeguard.
The packing must be disposed
of according to the ruling
standards by delivering it to authorised people for
the collection, disposal or reclaim.
Please contact the ASSOCIATION OF USED OILS
near to you.
2002/96/EC