Product Diagram; Adding Water; How To Use - TaoTronics TT-AH004 Guia Del Usuario

Product Diagram

① Nozzle
②
Handle
②
③ Water Tank
④
Water Filter
⑤ Tank Cap
⑥ Cleaning Brush
⑦
Air Outlet
⑧ Base
⑨
Control Panel
⑩ Power Cord
⑦
⑩

Adding Water

①
• Place the humidifier on a flat surface, lift the water tank and place it
upside down .
• Unscrew the tank cap counterclockwise, fill the water tank with clean
water (make sure it doesn't overflow ).
• Screw the tank cap back on in a clockwise direction. Do not screw with
③
too much force to avoid damaging the tank inlet.
• Place the tank back on the base.

How to Use

Connect the power cord after water has been lled and operate the
humidi er through the control panel. Follow the instructions below:
④
⑤
⑥
⑧
⑨
1.
2.
button to cycle through 4 mist output levels.
Power: Touch the power button to turn the unit on/ off.
Mist Output: When the unit is powered on, touch the Mist Output
03/04