Dmx Linking - Chauvet Professional OVATION P-56UV Guía De Referencia Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 13 Ovation P-56UV products at 120 V, 21 products at 208 V, or 23 products at 230 V. Never exceed this
number. Power linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Replacing The Fuse
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and rating.
4.
Screw the fuse holder cap back in place and reconnect power

DMX Linking

The Ovation P-56UV will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is
available from
www.chauvetprofessional.com.
DMX Connection
The Ovation P-56UV uses a 3- or 5-pin DMX data connection for its DMX personalities: 1 Ch, 2 Ch, 3 Ch, and 6 Ch. See
the User Manual for information about connecting and configuring the product for DMX operation.
Master/Slave Connection
The Ovation P-56UV uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation P-56UV supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Overhead Mounting
Ovation P-56UV QRG Rev. 4
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Safety
Notes. Use at least one mounting point per product. Make sure the
Mounting Clamp
Safety Cable
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
Floor Mounting
EN
Screw Color
Yellow/Brass
Silver
Green
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ovation p-56uv

Tabla de contenido