Auto Search; Close Caption; Watching Tv Program; How To Select The Desired Program - Haier L26F6 El Manual Del Propietario

Basic Receiving and Playing Operations
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press VOL- / VOL+ to set Skip as Off.

Auto search

A
Press MENU on the remote control to display main
menu, and then press CH+ /CH- to select Tuning
menu.
B
CH+ /CH- to select the Auto Search option,
press
press OK or VOL+to enter the auto search menu,
afterwards press VOL- / VOL+ to select the Confirm
option, and finally press OK to confirm the starting of
auto search.
Tuning
C
During auto search, the scale value on the progress
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.

Close Caption

A
Press MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
press CH+ /CH- to select Tuning menu, press OK or
14 LCD television Owner's Manual
Channel Type Air
Channel Edit
Auto Seaching...
Auto Search
Channel 8
Close Caption
Frequency: 152.25MHz
40%
Return Move
Menu
OK
VOL+to enter.
B
Press
C
Press
ext2,Text3,Text4 or OFF.

Watching TV Program

You can watch TV program in a presetting channel.

How to select the desired program

A
Using Program number buttons
Directly enter the channel number with the numeric
keypad on the remote control. If to select channel
numbers of double-digital or three-figure, press
continuously the numeric buttons in three second.
B
Using
Press CH+ to select a channel number in number
increasing direction. Press CH- to select a channel
number in number decreasing direction.

How to select the desired sound

Press VOL-/+ buttons on the remote or the front of
the TV set to adjust the volume level. The range is
0~100. When the volume buttons are pressed the
volume level is displayed automatically on the TV
screen.

Mute Setting

OK
A
Press
will display on the screen. At this time, the sound of
the TV set is turned off.
B
If you want to recover the sound, press
button again or directly press VOL+ button.

Quick program view

A
Suppose that you previously watched a TV program
on Channel 8, but now you are watching a TV
program on Channel 18 (as shown in the below
figure).
CH+ /CH- to select the close caption option.
VOL- / VOL+ to select CC1,CC2,CC3,CC4,Text1,T
CH+ /CH- buttons
MUTE button on the remote control and a icon
MUTE