Tabla de contenido
Publicidad
Contenido del paquete
Barra de sonido
Cable de audio RCA
Características
Vista superior
N.° Elemento Descripción
Indicador de
1
encendido
2
Indicador de la
fuente
3
Botón
Permite encender la barra de sonido. Presione de nuevo para poner la barra de
(encendido)
sonido en el modo de suspensión.
Barra de sonido mini de 2.0 canales con Bluetooth
Control remoto
Adaptador de CA
• Se ilumina en rojo cuando la barra de sonido se encuentra en el modo de
suspensión.
• Parpadea en rojo cuando la barra de sonido está silenciada.
• Se apaga cuando la unidad se encuentra encendida.
• Verde: fuente óptica
• Naranja: fuente RCA
• Azul: fuente Bluetooth (parpadea cuando está en el modo de emparejamiento)
• Violeta: DSP seleccionado (en el control remoto)
• Parpadea: cuando se ajusta el volumen. Se ilumina en continuo al alcanzar el
nivel máximo o mínimo de volumen.
www.insigniaproducts.com
PACKAGE CONTENTS
CONNECTING THE SOUNDBAR
Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box, to
QUICK SETUP GUIDE
Mini 2.0 Soundbar
Soundbar
You can connect several devices and switch the sound source as required.
Quick Setup Guide
Note:
with Bluetooth
AUDIO QUALITY
JACK TYPE (on source device)
NS-SB216
BEST
Digital optical cable (not included)
AC adapter
3.5 mm to
RCA audio cable
Remote control
RCA adapter
GOOD
RCA audio cable (included)
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then click Support & Service.
GOOD
3.5 mm audio cable (adapter included)
Enter NS-SB216 in the box under Manual, Firmware, Drivers &
Product Information, then click ►.
FEATURES
- PICK ONE -
Top view
Digital connections (BEST)
Back of the soundbar
#
DESCRIPTION
FUNCTION
1 Connect one end of the digital optical cable (not included)
1
Power indicator
• Lights red when the soundbar is in standby mode.
to the OPTICAL jack on your soundbar.
• Blinks red when the soundbar is muted.
2 Connect the other end into the digital optical output port
on your audio source device.
2
Source indicator
• Green: Optical source
• Orange: RCA source
3 Change the device's audio output to 'PCM' format (typically
• Blue: Bluetooth source (blinks when in pairing mode)
found in audio settings). Refer to the documentation that
• Purple: DSP selected (on remote)
came with your audio source device for more information.
Back view
• Flashes: when adjusting volume. Turns solid when the maximum or
minimum sound level is reached.
3
(Power) button
(Source) button
Press repeatedly to cycle through the available sound sources:
4
• Optical
• RCA
- OR -
• Bluetooth
B
c a
o k
h t f
s e
u o
d n
r a b
5
VOL +/– buttons
Press to increase or decrease the volume of the soundbar.
RCA connection (GOOD)
6
RCA
(R and L) jacks
If your TV (or other audio source device) has RCA out jacks, connect the
Remote control
1 Connect one end of the RCA audio cable to the RCA ports
RCA cables to your source device and these jacks.
on your soundbar.
OPTICAL (input) jack
If your TV (or other audio source device) has an optical out jack, connect
7
a digital optical cable (not included) to your source device and this jack.
2 Connect the other end into the RCA audio OUTPUT ports
on your audio source device.
8
DC IN jack
Connect the AC adapter to this jack to power the soundbar.
Note: Make sure that the cable ends match the color of the
9
(Power) button
ports.
10
SOURCE buttons
Press to select the sound source. Select Optical, RCA, or Bluetooth.
(Mute) button
Press to mute the sound from the soundbar. Press again to restore the
11
sound.
12
VOL +/– buttons
Press to increase or decrease the volume of the soundbar.
13
DSP buttons
Press to select the Digital Signal Processor (DSP) sound mode:
• Standard: Lets you enjoy normal sound.
- OR -
• Theater: Best for enjoying movies. Bass frequencies are enhanced.
TV or
3.5mm to RCA adapter
• News: Select for clear voice reproduction.
3.5 mm connection (GOOD)
DVD/Blu-ray
player
1 Connect one end of the RCA audio cable connectors
to your soundbar, then connect the other end to the
3.5 mm to RCA adapter (included).
2
Plug the other 3.5 mm male end of the adapter into
Back of the
the headphone or AUX Output on your audio source
device.
soundbar
RMC-SB216
Before using your new product, please read these instructions to prevent any damage.
Guía de instalación rápida
Adaptador de 3.5 mm a RCA
CONNECTING THE AC ADAPTER
Cautions:
•
Make sure that the electrical outlet matches the AC adapter's input requirements of 100-240 V, 50/60 Hz before
connecting.
•
Use only the AC adapter provided.
•
Plug in the AC adapter only after all other connections have been made.
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
CABLE
2 Plug the other end of the AC adapter into a power outlet or surge protector.
Back of the soundbar
AC wall plug
TV or DVD/Blu-ray
player
AC adapter
Pairing your devices
1 Turn on your soundbar.
Digital optical cable
2 Place your Bluetooth device within 30 ft. (10 m) of your soundbar.
(not included)
3 Press the (Bluetooth) button on the remote control or the
(source) button on the soundbar to
select Bluetooth mode. The LED blinks blue.
T
o V
D r
D V
B /
- u l
y a r
a l p
r e y
4 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For
additional information on pairing your device, refer to your devices' documentation.
5 On your Bluetooth device, select "NS-SB216" from the device list. Repeat steps 1-4 if "NS-SB216" is not
displayed.
6 If a PIN code is requested, enter "0000."
7 When pairing is completed the LED lights solid blue.
Notes:
•
Some devices, such as an iPhone, connect immediately after pairing so the Bluetooth indicator on your
soundbar remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this
instance, the Bluetooth indicator continues to blink until a connection is established.
RCA audio cable (included)
•
Your soundbar saves pairing information for up to eight devices. However, it can only be connected and play
content from one device at a time.
•
When you turn on your soundbar, it automatically connects to the last connected device if that device is in
(included)
and manually connect to the other paired device.
Disconnecting your devices
Note: For more information about using Bluetooth, see the online User Guide.
RCA audio cable (included)
OVER
5
Publicidad
Tabla de contenido
