Brudden Movement SUPINO idea Manual Do Usuário página 91

MAINTENANCE
7
MAINTENANCE PANEL EQUIPMENT
Use the following table to know the periodicity of maintenance.
CHECK
CLEANING equipment before AND
SCREW
PULLEYS
LOCK PIN
TENSIONER
LOAD MULTIPLIER
Check all steel cables for
STEEL CABLE
Check if the selector pin
SELECTOR PIN
is broken or damaged.
FAIRING
COUNTER
UPHOLSTERY
ADJUSTMENTS
Any queries can be made about damages to the customer service center, by calling 0800-7724080. To find an Authorized dealer go to
http://movement.com.br/assistencia-tecnica and allow the browser to access your location and facilitate to a nearest authorized person.
DAILY
Always clean the
after each workout.
Re-tighten the screws if
Check that the pulleys
are not damaged or
Check that the pins are
not damaged or worn.
Verify that the load
multiplier is not
damaged or worn.
damage or cracks.
Check that the fairing is
not damaged or broken.
WEEKLY
they are loose.
worn .
Check that the steel cables
tensioned as described
Check if the settings are
43
MONTHLY
are properly divided.
in the manual.
working perfectly
WHEN NEEDED
Make counter
battery replacement
Make the upholstery
replacement if it is torn.