Pulmic INDUSTRIAL 15 + VITON Manual Del Usuario página 21

- Remove the cap and, using the load filter, pour the liquid
in the tank. Replace the cap and tighten securely. For some
products, you should prepare before the mixture in a suita-
ble container.
- Place the bag on an elevated surface (a table), ensure that
anchors from them to the tanks are firmly attached and pull
straps on your shoulders, you must first have adjusted itself
to its proper size
- To start working with the model 15L3S (3 speeds) 3S
action button with your left hand and a light will turn green,
the sprayer will start at speed 1 (low pressure), pressing for
the second time LED light changes to orange, get speed 2
(medium pressure) by pressing a third time the indicator
light changes to red, get speed 3 (high pressure) .
After selecting the desired speed, action the spray lever to
spray . For convenience, this handle can be locked in its
operating position. Pressing a fourth time the light is turned
o and the sprayer will stop, leaving it on standby to be
used again when required.
MAKE SURE TO UNPLUG THE MACHINE TO FINISH THE
WORK.
Y
RELEASING HANDLE THE
PUMP STOPS
AUTOMATICALLY
21