Mode Selector
Each time the
is pressed, the display window will change
DISP
over as shown below;
Priority
Temporary
STN CALL
LEVEL 1
(NO NAME)
CLOCK 12
CLK ADJ
Display priority setting
Display Priority can be set for the following items;
Radio mode
• Frequency and Station Name, plus during
CDC (CD changer) mode
• Disc No, Track No, Track time and Disc name.
Example
To set Station Name to the Display Priority.
1.
Press the
three times, and the temporary display
DISP
appears in the display window.
2.
Hold the
pressed for more than 2 seconds.
DISP
" NO NAME" or a previously assigned station name blinks
once to indicate that Station Name is selected for the Dis-
play Priority.
After 5 seconds, the display mode will automatically re-
turn to the Display Priority showing either "NO NAME" or
the station name.
Tip
Frequency Display is initially set to the Display Priority,
and Station Name ("NO NAME") is set to the "Tempo-
rary" indicator.
E-4
Adjusting the Sound Characteristics
1.
Press the
AUD
as follows;
BASS 0
TREBLE 0
METER 1
R0 F0 (FADER)
MESSAGE
2.
Rotate the dial to adjust the selected item.
Adjust within 3 seconds after selecting the item. After 3
seconds, the dial reverts to volume control. Use the fol-
lowing tables as a guide for adjusting the settings in each
mode.
BASS
TREBLE
LOUDNESS
BALANCE
FADER
Tip
Settings for BASS, TREBLE, LOUDNESS and XBASS can
be made to each of the following modes independently:
FM, AM, CD Changer and AUX.
to select the desired adjustment mode
LOUD OFF (LOUDNESS)
L0 R0 (BALANCE)
Adjustment Range
BASS -5
BASS +5
TREBLE -5
TREBLE +5
LOUD OFF
LOUD ON
L9 R0(Full left)
L0 R9(Full right)
R9 F0(Full rear)
R0 F9(Full front)
Switching the Source (Selecting auxiliary
input)
You can connect the auxiliary equipment (Portable cassette
player, etc.) to this radio via optional AUX-IN cable. (See page
11)
Each time the
is pressed, the operation source will
SRC
change over as shown below;
CD
CD changer or AUX
Press the
to return to tuner mode.
BND / TS
Note
If the
button is pressed when no CD has been loaded
SRC
into the unit, The CD mode will skip to the CD changer mode
or AUX mode.
Also, if the CD changer is not connected, the system will move
across to the AUX mode regardless of whether auxiliary equip-
ment is connected or not ("MP3/AUX" will be displayed.)
It is not possible to switch to the AUX mode when the CD
changer is connected.
Remote Control (Optional)
You can operate your receivers basic AM, FM, CD & CDC
features via an optional IR Remote Control. Optional Credit
Card type remotes are available.