Troubleshooting - Bionaire BWM001X Manual De Instrucciones

FITTING OF A PLUG - UK AND
IRELAND ONLY
If the plug is not suitable for the socket outlets in your home,
it can be removed and replaced by a plug of the correct
type. If you remove the plug it must not be connected
to a 13 amp socket and the plug must be disposed of
immediately.
N@ E: I
are unsure or in doubt about the installation of the plug
I 13A 3-
, B 1363
A A B 1362
The wires of the mains lead are coloured in accordance with
the following code:
G EEN/ ELL@ -
B @ N -
BL E -
connected to the terminal in your plug which is marked with
E
G EEN / ELL@ .
TROUBLE
Unit does not turn on.
.
Mist output low.
Water leaks from tank.
Crack in tank.
F .
.
, A A
.
.
EA Ȃ
LI E
NE AL
G EEN/ ELL@
( ) G EEN

TROUBLESHOOTING

PROBABLE CAUSE
N .
@ .
Water tank empty.
Scale build up on heating element.
Scale build up on heating element.
Ȃ
Tank seal is missing.
Cap not tight enough.
Tank water is hot.
Hot water will cause the tank to pressurise.
Tank will crack if hit or dropped.
Mineral deposits.
BLACK.
ED.
Plug in unit.
Have outlet replaced by a licensed electrician.
. F
. A
Tighten the cap.
F
D
is required.
Clean/disinfect tank as instructed in Cleaning
and Maintenance instructions.
7
BL E
B @ N
SOLUTION
.
Reset Procedure.
.
.
. A
N
L
5A
.
.
.