Care And Maintenance - SPX RADIODETECTION RD5100 H2O Guia Del Usuario

2. Press the key to enter the power level menu.
3. Scroll up or down through the power output options using the
STDBY: Transmitter standby mode, the connection is still active but the
•
output is disabled – use to prolong battery life.
LOW: Low power output.
•
MED: Medium power output.
•
HIGH: High power output.
•
BOOST: Temporarily boosts transmitter power output to its maximum level.
•
4. Once you have selected the mode you want, press the
5. Press and hold the key to select the new setting and exit the menu.
6. Press the key once to send the settings to the transmitter.
NOTE: When changing the transmitter frequency using iLOC, the chosen
transmitter power setting will be retained.
Training
Radiodetection provides training services for most Radiodetection products.
Our qualified instructors will train equipment operators or other personnel at your
preferred location or at Radiodetection headquarters. For more information go to
www.radiodetection.com or contact your local Radiodetection representative.

Care and maintenance

The RD5100H O+ locator and transmitter are robust, durable and weatherproof.
2
However you can extend your equipment's life by following these care and
maintenance guidelines.
General
Store the equipment in a clean and dry environment.
Ensure all terminals and connection sockets are clean, free of debris and corrosion
and are undamaged.
Do not use this equipment when damaged or faulty.
Batteries and power supply
Only use the rechargeable battery packs, chargers and power supplies approved by
Radiodetection.
If not using rechargeable packs, use good quality Alkaline or NiMH batteries only.
Batteries should be disposed of in accordance with your company's work practice,
and / or any relevant laws or guidelines in your country.
or keys:
key to confirm.
18
Cleaning
WARNING: Do not attempt to clean this equipment when it is powered or
connected to any power source, including batteries, adapters and live cables.
Ensure the equipment is clean and dry whenever possible.
Clean with a soft, moistened cloth. Do not use abrasive materials or chemicals as they
may damage the casing, including the reflective labels. Do not use high pressure jets of
water to clean the equipment.
If using this equipment in foul water systems or other areas where biological hazards
may be present, use an appropriate disinfectant.
Software upgrades
From time to time, Radiodetection may release software upgrades to enhance features
and improve performance of the RD5100H
upgrades are free of charge and provided through a software manager Personal
Computer (PC) application.
E-mail alerts and notification of new software releases are sent to all registered users.
Disassembly
Do not attempt to disassemble this equipment under any circumstances. The locator
and transmitter contain no user serviceable parts.
Unauthorized disassembly will void the manufacturer's warranty, and may damage the
equipment or reduce its performance.
Service and maintenance
Regularly check your equipment for correct operation by using the Self-Test function
and eCert.
The locator and transmitter are designed so that they do not require regular
recalibration. However, as with all safety equipment, it is recommended that they are
serviced and calibrated at least once a year either at Radiodetection or an approved
repair center.
NOTE: Service by non-approved service centers may void the manufacturer's
warranty.
Details of Radiodetection offices and distribution partners can be found at
www.radiodetection.com.
Radiodetection products, including this guide, are under continuous development and
are subject to change without notice. Go to www.radiodetection.com or contact
your local Radiodetection representative for the latest information regarding the
RD5100H O+ locator or any Radiodetection product.
2
O+ locator or transmitter. Software
2
19