Telefunken DIAMOND Serie Manual De Instrucciones página 21

- Power on
Select "Power on" using the "Up/Down" keys on the remote, then press the "Enter" key to select "On"
or "Off".
- Auto boot time
Select "Auto Boot Time" using the "Up/Down" keys on the remote and press "Enter", then:
 Use the "Up/Down" keys to choose between Hour, Minute, AM, PM
 Use the "Left/Right" keys to set the values for Hour, Minute, AM, PM
- Power off
Select "Power off" using the "Up/Down" keys on the remote, then press the "Enter" key to choose "On"
or "Off".
- Auto shut time
Select "Auto Shut Time" using the "Up/Down" keys on the remote and press "Enter", then:
 Use the "Up/Down" keys to choose between Hour, Minute, AM, PM

Use the "Left/Right" keys to set the values for Hour, Minute, AM, PM
- Auto power frequency
Select "Auto-Power Frequency" using the "Up/Down" keys on the remote and press "Enter", then
press the "Up/Down" keys to choose between:

Once

Everyday

Mon. to Fri.

Weekend
- Reset
If the frame is handled incorrectly, it may be useful to reset its default settings. To do so, select "Default"
using the "Up/Down" keys on the remote and press "Enter", then use "Up/Down" keys to select "On" or
"Off".
Note: After Resetting, the language selection screen will appear during the following start-up, just as it
did for its first use.
- Version number of the internal software (for information only)
Non contractual document subject to change in case of typographical errors (Mktg1011)
The manufacturer reserves the right to modify the product specifications without notice.
COPYRIGHT SOPEG 2011
20