Antenna Setting - Zodiac DZR-6FTA Manual De Instrucciones

Antenna Setting

Press MENU button, use the CH▲▼ to select "Installtion" and press OK button, use the CH▲▼
to select "Antenna Setting". Press OK button then Sub-menu box will be appeared (Figure 7).
In this menu ,you can select the satellite and LNB settings by using ◄ ► buttons
And use the ▲▼ buttons to select the item. Press the OK buttons to confirm and EXIT buttons to
exit.
l
Satellite name
Press the ◄ ► buttons to select the Satellite Name
l
Transponder
Press the ◄ ► buttons to select the TP to search
l
LNB Freq
Press the ◄ ► buttons to select the LNB Type Normal or Universal
l
LNB Power
Press the ◄ ► buttons to select the LNB Power 13V or 18V or Off.
l
22KHz
When you use a Dual LNB or two antennas connected to a 22KHz switch box, make
22KHz switch ON or OFF to select LNB or antenna..
l
Switch
Press the ◄ ► buttons to select the DiSEqc switch, select from 1to 4 DiSEqc1.0 and OFF
and Auto DiSEqc.
l
0/12V
Press the ◄ ► buttons to select the 12V on or off
l
Motorised System
Press the ◄ ► buttons to select the DiSEqc1.2 Setting
l
Satellite or TP or Network Scan
Press Red or Yellow or Green or Blue key searches a satellite or a TP or a Network
Figure 7
38