USER MANUAL
Important safety instructions
1. The voltage used by this UPS may be hazardous. The unit contains no user
serviceable parts; do not attempt to disassemble the unit. Only factory service
technicians can perform maintenance on the unit.
2. This unit is intended for installation in a controlled environment (temperature -
controlled indoor area location, free of conductive contaminants). Avoid installing
the UPS where there is standing or running water, or excessive humidity.
3. To reduce the risk of overheating, do not cover the cooling vent. Avoid exposing
the UPS to direct sunlight or installing the unit near heat-emitting appliances, such
as electric heaters or furnaces.
4. Do not connect non-computer related peripheral devices, such as medical devices,
life-support equipment, microwave ovens, or vacuum cleaners to the UPS.
5. Do not connect any power strip or surge suppressor to the UPS.
6. Do not plug the UPS AC input power cord into its own output.
7. Do not allow any kind of liquid or foreign object to enter this UPS unit. Do not place
beverages or any other containers with liquid on or nearby the unit.
8. During the installation of this equipment, make sure that the sum of the leakage
currents of the UPS and the connected loads shall not exceed 3.5mA.
9. In case of emergency, turn the power button "off" and disconnect the power cord
from the AC mains outlet.
10. Unplug the UPS before cleaning, and do not use liquid or spray detergents.
11. Never try to open or mutilate a battery. Released electrolyte is harmful to the skin
and eyes, and also can be toxic.
12. Servicing of batteries should be performed or supervised by experts who possess
the knowledge to closely follow all required precautions.
13. When replacing the battery, make sure to use the same type and number of
sealed lead-acid batteries specified.
CAUTION
Attention: Risk of electric shock
Safe handling of batteries
• A battery can present the risk of short-circuit current and electrical shock. The
following precautions should be taken:
1. Remove watches, rings, or other metal objects from your hand.
2. Use tools with insulated handles.
3. Wear rubber gloves and boots.
4. Do not place tools or metal parts on the top of batteries.
5. Disconnect charging source prior to connecting or disconnecting battery
terminals.
• Attention: potentially hazardous voltages from the battery can still be present
even after disconnecting the UPS from the AC mains. Therefore, the positive and
negative terminals of the battery shall be disconnected prior to performing any
maintenance or repair inside the unit.
• The UPS contains internal 12VDC, sealed, lead-acid batteries.
• Do not dispose of batteries in a fire. Batteries may explode if exposed to high
temperatures.
1. Introduction
Thank you for purchasing the XG-1201LCD/XG-1501LCD PFC UPS system from
Forza. To enjoy all the features and benefits of this unit, we encourage you to read
this manual and follow the installation and operation procedure thoroughly.
2. Package content
2.1 Inspection
Upon opening the box, make sure the following items are included.
UPS unit
Installation CD
forzaups.com
User guide
Warranty certificate