Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for GMOS-LAN-034
GMOS-LAN-034
GM LAN-11 OnStar interface 2006-2012
• Provides accessory power
(12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Can be used in non-amplified, or
amplified models
• Retains chimes
• Provides NAV outputs (parking brake,
reverse, mute, and speed sense)
CHEVROLET
Cobalt
HHR
Malibu
PONTIAC
G6
G6
(5th digit of the VIN must be J, K, or L)
METRA. The World's best kits.™
FEATURES
• Pre-wired ASWC-1 harness included
(ASWC-1 sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable volume for chimes and OnStar
• High level speaker input
• USB updatable
• Retains factory satellite radio
APPLICATIONS
PONTIAC
(continued)
2007-2010
G5
2006-2011
Solstice
2008-2012
SATURN
Aura
2010
Sky
2009
1-800-221-0932
INTERFACE COMPONENTS
• GMOS-LAN-034 interface • GMOS-LAN-034
harness • 16-pin harness with stripped leads
• 4-pin to 4-pin resistor pad harness
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape • Connectors
(example: butt-connectors, bell caps, etc.)
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
2007-2009
installation. All accessories, switches, and especially
2006-2009
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
2007-2009
2006-2009
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION
Publicidad
Tabla de contenido
Manuales relacionados para Axxess GMOS-LAN-034
Resumen de contenidos para Axxess GMOS-LAN-034
- Página 1 Installation instructions for GMOS-LAN-034 GMOS-LAN-034 INTERFACE COMPONENTS • GMOS-LAN-034 interface • GMOS-LAN-034 GM LAN-11 OnStar interface 2006-2012 harness • 16-pin harness with stripped leads • 4-pin to 4-pin resistor pad harness FEATURES • Provides accessory power • Pre-wired ASWC-1 harness included (12-volt 10-amp) (ASWC-1 sold separately) TOOLS REQUIRED • Retains R.A.P. (retained accessory power) • Retains OnStar/OE Bluetooth • Cutting tool • Crimping tool • Tape • Connectors (example: butt-connectors, bell caps, etc.) • Can be used in non-amplified, or • Adjustable volume for chimes and OnStar amplified models • High level speaker input • Retains chimes • USB updatable • Provides NAV outputs (parking brake,...
-
Página 2: Connections To Be Made
Note: If installing the ASWC-1, there will be an accessory wire on the 12-pin harness to connect as well. • Connect the Blue/Pink wire to the speed sense wire (V.S.S.) (if applicable). • Connect the Orange/White wire to the illumination wire. (If the aftermarket • Connect the Green/Purple wire to the reverse wire (if applicable). radio has no illumination wire, tape off the Orange/White wire). From the GMOS-LAN-034 harness: • Connect the Blue/White wire to the amp turn on wire (this wire must be connected to hear sound from the factory amplifier). (a) 16-pin and 14-pin harness to the aftermarket radio: • Connect the Brown wire to the mute wire of the aftermarket radio. If the radio • Connect the Black wire to the ground wire. - Página 3 • Connect the Green wire to the left rear positive speaker output. • Connect the Red wire to the accessory wire. • Connect the Green/Black wire to the left rear negative speaker output. Note: The relay attached to the GMOS-LAN-034 harness is only for audible • Connect the Purple wire to the right rear positive speaker output. turn signal clicks. No extra steps are required to retain this feature, so leave the relay as-is.
- Página 4 GMOS-LAN-034 Installing the GMOS-LAN-034 Adjusting the GMOS-LAN-034 • Connect the 16-pin harness into the interface. • Wait 10 seconds, and then with a small screwdriver, turn the potentiometer clockwise to raise the chime level; counterclockwise to lower the chime level. • Connect the 22-pin harness into the interface. • When the chime level is at a desired level, remove the keys from the ignition. • With the key in the off position, connect the 16-pin and 14-pin harnesses This will lock the chime volume at its current level. into the vehicle. • With all connections completed, reconnect the negative battery terminal. Audio level adjustment (amplified models only): Note: If using the ASWC-1, connect it after you initialize and test the GMOS- • With the vehicle and radio turned on, turn the volume up 3/4 of the way.
-
Página 5: Extra Features
GMOS-LAN-034 Extra features Notes Audio level adjustment (amplified models only): • If your vehicle comes equipped with factory satellite radio, the GMOS-LAN-034 can retain this feature. • Change the source of the radio to AUX-IN; the satellite radio will start playing. • The optional AX-LCD (sold separately) will now display your satellite radio information. • Listed below are the functions of the AX-LCD buttons while using the satellite radio: • Arrow up - Channel up. • Arrow down - Channel down. • Enter - Selects current item on the screen. • Return/ESC - Exits to previous screen. - Página 6 GMOS-LAN-034 Notes...
- Página 7 GMOS-LAN-034 Notes...
-
Página 8: Important Warning
Installation instructions for GMOS-LAN-034 IMPORTANT WARNING This product includes instructions for installation which must be carefully followed. The instructions are worded in such a manner to assume that the installer is capable of completing these type of electronic installations. If you are unclear as to what you are instructed to do or believe that you do not understand the instructions so as to properly and safely complete the installation you should consult a technician who does have this knowledge and understanding. Failure to follow these instructions carefully and to install the interface as described could cause harm to the vehicle or to safety systems on the vehicle. -
Página 9: Herramientas Requeridas
GMOS-LAN-034 COMPONENTES DE LA INTERFASE • Interfase GMOS-LAN-034 • Arnés Interfase OnStar para GM LAN-11 2006-2012 GMOS-LAN-034 • Arnés de 16 pins con conectores pelados • Arnés de almohadilla de resistencia de CARACTERÍSTICAS 4 pins a 4 pins • Provee corriente de accesorio (12 voltios •... -
Página 10: Conexiones Que Se Deben Hacer
Desde el arnés GMOS-LAN-034: • Conecte el cable azul/blanco al cable de encendido del amplificador (este (a) Arnés de 16 pins a 14 pins al radio de mercado secundario: cable debe estar conectado para escuchar sonido del amplificador de fábrica). - Página 11 • Conecte el cable rojo con el cable de accesorios • Conecte el cable púrpura/negro con la salida negativa derecha de atrás. Nota: El relé adjunto al GMOS-LAN-034 únicamente es para los chasquidos Nota: El arnés de almohadilla de resistencia de 4 pins a 4 pins no se utilizará...
-
Página 12: Instalación Del Gmos-Lan-034
Ajuste del nivel de audio (únicamente modelos amplificados): Nota: Si va a utilizar el ASWC-1, conéctelo después de inicializar y probar el GMOS-LAN-034 con la llave en la posición de apagado. • Con el vehículo y el radio encendidos, suba el volumen a 3/4 del nivel máximo. -
Página 13: Funciones Adicionales
Ajuste del nivel de audio (únicamente modelos amplificados): • Si su vehículo viene equipado con radio satelital de fábrica, el GMOS-LAN-034 puede retener esta función. • Cambie la fuente del radio a AUX-IN; el radio satelital empezará a tocar. • El AX-LCD opcional (se vende por separado) mostrará su información de radio satelital. - Página 14 GMOS-LAN-034 Notas...
- Página 15 GMOS-LAN-034 Notas...
-
Página 16: Advertencia Importante
Instrucciones de instalación para GMOS-LAN-034 ADVERTENCIA IMPORTANTE Este producto incluye instrucciones de instalación que deben seguirse cuidadosamente. Dichas instrucciones están redactadas dando por supuesto que el instalador es capaz de completar estos tipos de instalaciones electrónicas. Si tiene dudas respecto de lo que se le indica que haga o cree que no comprende las instrucciones como para completar la instalación en forma adecuada y segura, debe consultar a un técnico que efectivamente...