Usb Operation - Denver TCU-211 Manual De Instrucciones

Playing a disc
- Track 1 will be started after inserting a CD. The playback starts playing the first track.
- Pausing playback: Press the "PLAY/PAUSE" button (9).
- Continuing playback: Press the "PLAY/PAUSE" button (9) again.
- Stopping playback: Press the "STOP" button (1).
- Forward to next folder for MP3-CD discs: Press "PROG/FOLDER+" (2) to forward to next folder.
Searching a track
- During playback, titles can be searched using the "FWD/NEXT" or "REV/BACK" button (7 or 8).
- Press and hold "FWD/NEXT" (7) to fast forward or "REV/BACK" (8) to reverse in order to find a
particular position with a track. Let go when you reach the desired position. Playback will now
continue from this position.
Repeat a track
- Repeat 1: Press the "REPEAT" button (3) once, the repeat indicator will flash continuously.
This single track will be repeated.
- Repeat all: Press the "REPEAT" button
whole disc will be repeated.
- To cancel repeat function: Press the "REPEAT" button (3) until the lighted repeat indicator
turned off.
Programmed playback
1. Set the appliance to "STOP" mode and press the PROG/FOLDER+ button (2). P lights
up & P01 flashes.
2. Press "FWD/NEXT" or "REV/BACK" button (7 or 8) to select your desired tracks.
3. Press the PROG/FOLDER+ button (2) to confirm selected title and save to memory.
The next track number to be programmed and appears: P02.You can program up to 20
CD-title or 99 MP3 titles in any desired order.
4. Repeat the steps above to save additional tracks into the program memory.
5. Press the PLAY/PAUSE button (9). The playback of all programmed tracks starts.
6. Press the STOP button (1) twice to delete the program and to return to normal mode.
Opening the disc compartment lid also deleted the program and P is not shown in the
LCD display anymore.
- The appliance can play MP3 files from a USB stick.
- The maximum handling capacity is up to 32 GB.
- Set the function switch to USB position.
- Track 1 will be started after inserting a USB media into the USB port.
- The playback function of USB mode is identical to MP3 CD playback (-> CD operation).
- Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line- out
jack or phones jack on your MP3 player and the other side to the aux-in jack on the unit.
- Set the function switch (14) to CD/LINE IN position.
- Turn on your external device and follow the playback instruction.
ENG
twice, the repeat indicator will stay lighted. The
(3)

USB OPERATION

LINE - IN CONNECTION
6