Important Safeguards - Redmond RMG-CB1210-E Manual Del Usuario

Carefully read all instructions before operating and save them for future
reference. By carefully following these instructions you can considerably
prolong the service life of your appliance.

Important safeguards

• The manufacturer is not responsible for any failures arising from
the use of this product in a manner inconsistent with the techni-
cal or safety standards.
• This appliance is intended to be used in household and similar
applications such as: staff kitchen areas in shops, offices and
other working environments; farm houses; by clients in hotels,
motels and other residential type environments; bed and break-
fast type environments.
• Before installing the appliance, check that the device voltage
corresponds with the supply voltage in your home (refer to the
rating plate or technical data).
• While using the extension cord, make sure that its voltage is
the same as specified on the device. Using different voltage may
result in a fire or another accident, causing appliance damage
or short circuit.
REMEMBER: damaged cord may cause a shock, fire, or
lead to a failure that will not be covered by the warran-
ty. If the cable is damaged or requires replacing, contact
an authorized service centre only to avoid all risks.
• Do not place the appliance on soft, unstable surface or cover it
with a cloth while in operation as it may cause overheating or
breakdown.
• Do not use the appliance outdoors as ingress of moisture or for-
eign objects inside the housing may result in damage.
Do not push food into the feed chute port with fingers
or foreign objects as this may cause injuries or break-
down. Use pushers that come with the appliance.
8
• Do not use the appliance with visible damages of the housing or
power cord, after the fall of the appliance or if there any faults
detected. If any faults occur, unplug the appliance and contact
the service centre.
• Before cleaning the appliance ensure that it is unplugged and
has cooled down. While cleaning you are advised to follow the
instructions of the "Cleaning and maintenance" section of this
user manual.
DO NOT immerse the appliance in water or keep in
running water!
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children
shall not play with the appliance. Keep the appliance and its cord
out of reach of children aged less than 8 years. Cleaning and user
maintenance shall not be made by children without supervision.
• Keep the packaging (film, foam plastic and other) out of reach of
children as they may choke on them.
• No modifications or adjustments to the product are allowed. All
the repairs should be carried out by an authorized service centre.
Failure to do so may result in device and property damage or
injury.
CAUTION! Do not use the appliance in case of any
malfunctions.
Technical specifications
Model ................................................................................................................ RMG-CB1210-E
Voltage ....................................................................................................220-240 V, 50/60 Hz
Rated power ..................................................................................................................... 800 W
Maximum power ...........................................................................................................1500 W
Productivity ................................................................................................... up to 2.5 kg/min
Electric shock hazard protection .................................................................................class II
Operating speeds quantity ....................................................................................................1
Reverse function ................................................................................................................... yes
Overload protection ............................................................................................................. yes
Quantity of perforated disks for different stuffing ...........................................................3
Sausage attachment............................................................................................................. yes
Kebbe attachment ................................................................................................................ yes
Mechanical lock ..................................................................................................................... yes
Overall dimensions .............................................................................. 220 х 160 х 220 mm
Net weight. .............................................................................................................. 5.1 kg ± 3%
Power cord length ............................................................................................................1.2 m
Package includes
Motor unit .......................................1 pc. Kebbe attachment base ..............1 pc.
Meat grinder unit ..........................1 pc. Forming kebbe attachment ........1 pc.
Meat grinder screw .......................1 pc. Sausage attachment base ...........1 pc.
Locking knob ..................................1 pc. Forming sausage attachment ....1 pc.
Perforated disks for stuffing .....3 pcs. User manual ...................................1 pc.
Dismountable pusher...................1 pc. Service booklet ..............................1 pc.
Manufacturer reserves the right to make any modifications to design, packaging, or
technical specifications of the product without prior notice.
Meat grinder parts A1
1. Motor unit 11. Perforated disks with holes of differ-
2. ON/OFF button ent diameter
3. Reverse mode button REV 12. Locking knob
4. Drive shaft clutch 13. Kebbe attachment base
5. Grinder unit release button 14. Forming part of kebbe attachment
6. Loading tray 15. Sausage attachment base
7. Dismountable pusher with attachment 16. Forming part of sausage attachment
storage capacity 17. Compartment cover for attachments
8. Meat grinder unit storage
9. Screw 18. Power cord
10. Blade
I. BEFORE THE FIRST USE
Carefully remove the unit and its accessories from the packaging. Dispose all packag-
ing materials and promotional stickers.
Keep all warning labels, warning stickers (if any), and the serial number identification
label located on the housing. The absence of the serial number will deprive you of
your warranty benefits!
After transportation or storage at low temperatures allow the appliance to stay at
room temperature for at least 2 hours before using.
Wipe the motor unit with a moist cloth. Wash all removable parts, strictly following the
instructions in «Cleaning and maintenance». All the removable parts should completely
dry at room temperature before the assemblage. Ensure that outer and inner visible parts
of the grinder do not have faults, splits and other defects.
II. OPERATION
The multipurpose meat grinder REDMOND RMG-CB1210-E is a multifunctional ap-
pliance for food processing. The meat grinder is equipped with an overload protection
system of the motor (e. g. if the bone gets into the grinder unit together with meat).
If the motor is unexpectedly stopped, press the ON/OFF button, unplug the appliance
and let it cool down for 30 minutes. Clean the loading tray from remnants and plug
in the appliance. The appliance is ready for operation.