Briteq BT-W30FC Mk2 Manual De Instrucciones página 9

ENGLISH
Display Inversion
Display normal: display is readable when the unit is on the floor.
Display inversion: display is readable when the unit is mounted upside down.
 Press the MENU button until "dISP" is shown on the display. (normal display)
 Press the ENTER button to toggle between
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Adjust White balance
Makes it possible to adjust the white color when all colors are at maximum.
 Press the MENU button until
 Press the ENTER button, the display starts blinking.
 Use the DOWN and UP button to select the
 Press the ENTER button, the display starts blinking.
 Use the DOWN and UP button to adjust the value from 125 to 255 and press ENTER to confirm.
 Once the mode has been selected, press the ENTER button to confirm.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Manual Test
Used to manually test all functions of the unit.
 Press the MENU button to show
 Press the ENTER button, the display starts blinking.
 Use the DOWN and UP button to select the
(Blue), (White),
 Press the ENTER button, the display starts blinking.
 Use the DOWN and UP button adjust the value from 0 to 255 to test the unit.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
LED Temperature
Used to show the temperature of the LEDs
 Press the MENU button until the display shows
 Press the ENTER button to show the temperature of the LEDs on the display.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
CPU Temperature
Used to show the temperature of the CPU (processor)
 Press the MENU button until the display shows
 Press the ENTER button to show the temperature of the CPU on the display.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Self Test
Used to activate the internal "self-test" program which checks all possibilities of the unit.
 Press the MENU button until the display shows "teSt".
 Press the ENTER button to start the internal self-test program.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Fixture Hours
Used to show the number of working hours of the unit.
BRITEQ
®
is shown on the display.
(Red) or
on the display.
(Dimmer) or (Strobe) mode.
7/68
(normal display) and
(Green) or
(Pan) , (Tilt),
.
.
OPERATION MANUAL
(display inversion).
(Blue) color.
(Red), (Green),
BT-W30FC Mk2