KDP3 360
Presence detector
Caution
A circuit breaker (250VAC, 10A) type C according to EN60898-1 of
loadⅠshall be installed in the fixed wiring for protection.
A circuit breaker (250VAC, 6A) type C according to EN60898-1 of loadⅡshall
be installed in the fixed wiring for protection.
Do not mount on conductive surface.
Do not open the enclosure frequently.
Turn off power when change the light sources.
High in-rush current would be caused when bulbs of certain brands burned
which might damage the unit permanently.
Package contents
Pattern
Item
Detector
Quantity
Accessories for optional purchase
Pattern
Junction box
Item
KDP3/5
Quantity
Product description
KDP3 is a ceiling mount presence detector for lighting automation control.
User can pre-set the desired Lux and Time values by VR or IR setting for
automatic control lighting on/off with low initial cost and great energy saving
potential. It can be widely used in home, warehouse, open office, conference
room, class-room, library, corridor, etc.
Instructions manual |
Screw Φ3
x 16mm
1
2
1
22
Lens
Manual
shield
2
www.grupotemper.com
1