Insignia NS-RC4NA-16 Guía De Instalación Rápida

USING YOUR REMOTE CONTROL
1 Remove the battery cover and
install the AAA batteries.
Replace the cover.
2 Point the remote towards the
remote sensor on the front of
your TV.
3 Press
(power).
Cautions
Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or re.
Battery chemicals can cause a rash.
If the batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
Make sure that batteries are disposed
of correctly. Do not burn or incinerate.
Notes
Do not mix batteries of di erent types.
Do not mix old and new batteries.
Remove batteries when the charge is
depleted.
If the remote control is not going to be
used for an extended period of time,
remove the batteries.
Important: This remote control works with most Insignia TVs with model
numbers ending in 10A, A11, A12, A13, A14, A15, A16. Not designed to work with
TV/DVD combos. Some functions, such as MHL/ROKU, may not work on all TVs.
Roku Ready® means you can
use your Insignia remote
to control the Roku® Streaming
Stick without having to pick up
a different remote control.
PICTURE AUDIO CHANNELS SETTINGS HELP ROKU
Picture
Picture Mode Energy Saving
Advanced Settings
Backlight 40
Brightness 49
Contrast 50
Color 65
OK
MOVE SELECT MENU PREVIOUS EXIT EXIT
ENTER
What are my screen-size options?
NORMAL: Original aspect
ratio is preserved. You
might see black bars if the
original content is not
widescreen (16:9).
ZOOM: Expands the image
to ll the screen. The top
and bottom of the image
may be cropped.
WIDE: Use to watch content
that was recorded in
widescreen (16:9).
CINEMA: Stretches the
image at the edges, but
keeps a clear image in the
center.
AUTO: Automatically
adjusts the image based on
the screen size and the TV
program. Select this option
if you don't know which
aspect ratio to choose.
Note: Auto is only available
when AutoZoom in the
Channels menu is set to On.
Remote troubleshooting
Problem
Remote
control does
not work.
Quick Setup Guide | NS-RC4NA-16
Power
Turns your TV on or o .
Numbers
Enter channel numbers.
Enters a digital sub-channel
number (for example 4.1).
MENU
Opens the TV menu.
ENTER
Con rms selections or changes.
EXIT
TV: Closes the TV menu.
Roku: Closes the menu or videos.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
FAVORITE
Opens the Favorite Channel List.
SLEEP
Sets the sleep timer.
Media controls
USB: Control the photo
slideshow.
Roku: Control a movie or
show.
INlink: Control HDMI-CEC
devices connected to your TV.
Solution
• Make sure that the power cord is correctly connected to your TV
and a power outlet.
• Make sure that there are no obstructions between the remote
control and the remote control sensor on the front of the TV.
• Point the remote control directly at the remote control sensor
on your TV.
• The supplied batteries are wrapped tightly in clear plastic. Make sure
that you have removed this plastic from the batteries.
• Make sure that the batteries are installed correctly.
• Replace old batteries.
TV REMOTE CONTROL
INPUT
Opens the Input Source list.
Recall
Returns to the previous channel.
Arrows
TV: Navigate in TV menus.
Roku: Navigate in Roku screens.
Home
TV with MHL/ROKU: Opens the
MHL or ROKU home screen
when an MHL device or ROKU
Streaming Stick is plugged in.
TV without MHL/ROKU: Opens
the TV menu.
INFO*
TV: Opens a TV status banner.
Roku: Accesses special
Roku options.
CCD
Turns closed captioning on or o .
MUTE
Mutes the sound.
Channel
Changes the TV channels.
Game
Adjusts the picture for the
ultimate gaming experience.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
Input Source
TV
HDMI1
HDMI2
HDMI3
Component/AV
USB(Photos)