Bobrick SureFlo Instrucciones De Instalación página 6

Tubing Connections and Soap Pump Installation
4. Insert soap pump assemblies with vertical tubes into Shanks.
5. Secure the escutcheons by turning clockwise until lock snaps into position. Position
Spout over the lavatory.
6. Connect Tubing from cabinet to one horizontal arm of 830-311 3-Barb Tee placed
under first soap pump in the line. Make sure tube is completely engaged on the Tee
fitting.
Note: Excess tubing may need to be cut-off.
7. Connect bottom end of all soap pump vertical tubes to vertical arms of all Tees except
the last soap pump in the line.
Form No. 830-569 r11/13/12
Page 6
S/F © 2012 Bobrick Washroom Equipment, Inc.
(Existing and New Soap Dispensers)
Printed in U.S.A.