Before Initial Use; How To Use; Blending; Function P (Pulse) - Caso Standmixer B 1000 Manual Del Usuario

14.1 Before initial use

1. The device is featured with a safety protection device. The motor does not work when
blades/blade base are not correctly installed.
2. Clean all dismountable parts (refer to "cleaning and maintenance")
3. Please follow carefully overview and assembling
4. Care is needed when handling cutting blades, especially when removing the blade from
the bowl, emptying the bowl and during cleaning.

14.2 How to use

14.2.1 Blending

1. Clean all the parts which will touch the food.
2. Put the raw materials into blender jar, add some water according to personal preference
(but not more than 60 %), then put the blender cover on and put the top cover on the
feeding hole.
3. Insert the plugt into the outlet.
4. Turn the control dial to the desired speed (min – max) for blending.

14.2.2 Function P (pulse)

1. Press and hold the button (P) or press it several times, until the food reaches your
desired consistency. The device is working as long you press the button.

14.2.3 Function CRUSH ICE

1. Fill the jug with ice cubes.
2. Press the button CRUSH ICE, the machine will work discontinuously lasting for 1 min to
make the food reaches your desired consistency.

14.2.4 Function SMOOTHIE

1. Fill the jug with fruits and/or vegetables as well as enough liquid.
2. Press the button SMOOTHIE, the machine will keep working for 1 min to make the food
reaches your desired consistency.
Please note
► Don't remove the lid during operation.
► This device must not idle nor be overfilled, because the motor will overheat and gets
damaged. Fill the unit up to maximum of 60 percent.
► When you want to blend only liquid you can fill the device up to maximum marking.
► Do not leave the device unsupervised when it is in operation.
► Remove power plug first before pouring out the food.

14.3 Overheat protection

In order to prolong the device's service life, an overheat protecting unit is installed. If the
motor runs too long or overloaded, the temperature reaches the warning value and the
motor will stop automatically. Pull out power supply plug and wait for the motor to cool
(about 20 to 30 minutes), then use again.
Caso Standmixer B 1000 29