Operation And Handing; Before Initial Use; How To Use - Caso CB 2200 Manual Del Usuario

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

15.1 Before initial use

1. Remove any packaging of the device and the accessoires.
2. Before initial use, clean all the parts that get in touch with food thoroughly and dry them.

15.2 How to use

Please note
► The appliance will start only if the glass bowl is correctly positioned on motor base
housing unit and lid on the glass bowl.
5. Connect the appliance to a suitable mains supply outlet.
6. Press ON/OFF key to start the appliance, and it initializing the programme and go to
'standby' mode.
7. Select the desired programme and start the process by pressing Start/Stop key.
Warning
► Do not touch the bottom of glass bowl and glass bowl during cooking, as they get very
hot.
► If the glass bowl contains hot liquid, pour it out carefully.
Caso Mixer mit Kochfunktion CB 2200
1. Place the appliance on a firm,
stable & flat surface, allow sufficient
ventilation.
2. Place the lid on the glass bowl
and press it down firmly & properly.
3. Place the measuring cup into the
opening on the lid.
4. Position the glass bowl on to the
motor base housing unit by using
guided grooves and make sure glass
bowl fits properly on motor base
housing unit.
40