Getting Started - Corsair HS70 WIRELESS Guia De Inicio Rapido

5

GETTING STARTED

Connect the wireless USB transmitter to any working USB port on your PC.
The CORSAIR HS70 WIRELESS headset is designed to operate at
a range of up to 40 feet (12m) from the wireless USB transmitter, but other wireless
devices, electronics, and obstructions such as walls may reduce wireless range.
IMPORTANT:
The first time you use the CORSAIR HS70 WIRELESS headset transmitter on a PC,
the operating system will automatically install the device driver. After the device
driver loads, we recommend you reboot your PC before use.
CHARGING 1
IMPORTANT:
The CORSAIR HS70 WIRELESS headset must be fully charged before its first use.
• Connect the USB charging cable to any working USB port on your PC.
• Connect the USB charging cable to the CORSAIR HS70 WIRELESS headset.
The CORSAIR HS70 WIRELESS headset battery has no "memory effect", so there is
no need to completely discharge it before recharging. The lithium-ion battery in the
CORSAIR HS70 WIRELESS headset will last for hundreds of charge/discharge cycles.
Remember that the USB charging cable requires a high power (USB 2.0 or better)
port. Some USB ports found on older devices do not support USB 2.0.
CHARGING WHILE POWER IS OFF:
When the headset is OFF, and CHARGING with a connected USB cable, the Status
LED reports the charge and battery status:
STATUS LED DISPLAYS:
AMBER (SOLID): Charging
GREEN (SOLID): Fully charged
6