Attaching Cross Arms - Marshalltown DL11 Manual Del Usuario

The cross arms arrive on the cradle assembly in the storage position.
TO PLACE ThE CrOSS ArMS IN ThEIr OPErATING POSITIONS:
1. Pull the ring on the spring loaded plunger and remove from the storage bar.
2. Position the cross arm over one of the operating positions and drop down into place
ensuring that the spring loaded plunger has fully engaged in the locating hole.
CAUTION
The load support hook should be positioned on the side of the lift
!
opposite the winch.
8 8
Phone 800-888-0127 / 641-753-5999 • Fax 800-477-6341 / 641-753-6341 • www.MARSHALLTOWN.com Phone 800-888-0127 / 641-753-5999 • Fax 800-477-6341 / 641-753-6341 • www.MARSHALLTOWN.com

ATTACHING CROSS ARMS

CrOSS ArM
LOAD rAIL