Extending Load Rails; Load Support Hooks - Marshalltown DL11 Manual Del Usuario

The load rails can be extended to help support
wide loads.
TO EXTEND ThE rAILS:
1. Pull the ring on the spring loaded plunger and
slide the rail out. The spring loaded plunger will
engage in the next available position.
WARNING
The spring loaded plunger must be fully engaged prior to lifting a load.
!
WARNING
Never lift a load without ensuring it is properly balanced and
!
supported on the cradle.
TO POSITION ThE LOAD SuPPOrT hOOkS IN OPErATING POSITION:
1. Pull the ring on the spring loaded
plunger and rotate the hook from the
stowed position. Ensure that the spring
loaded plunger is fully engaged prior to
loading drywall onto the lift. NEVER
ATTEMPT TO LIFT A SHEET OF
DRYWALL WITHOUT POSITIONING
THE LOAD SUPPORT HOOKS IN THE
OPERATING POSITION.
WARNING
Attempting to lift a sheet of
!
drywall without using the
load support hooks can
result in injury.
WARNING
Atempting to lift more than
!
one sheet of drywall can
result in injury

EXTENDING LOAD RAILS

LOAD SUPPORT HOOKS

LOAD SuPPOrT hOOk
9