Name And Function Of Each Part; Operating Procedure - LEGRAND 430 531 Manual Del Usario

Name and function of each part

1. Video Output: Composite Video 1Vp-p, 75 Ohms, BNC.
2. Key Control:
No Name Function
 
1
Up
(

2
Down

3 Increase Value (+)
(+) /

4 Decrease Value (-)
(-) /
5 Menu Enter or Exit Setup Menu
Auto iris
6
connector
3. Protocol : AUTO/NATIVE/PELCO/LG
4. Baud Rates : 2.4K / 4.8K / 9.6K / 19.2K BPS

Operating procedure

1. Mount the camera on the mounting bracket, secure the camera (find the hole on the top or bottom of the camera) to the bracket
with the supplied mounting block and 2 screws.
2. Connect the video output to the monitor or other video device via a 75 Ohms type coaxial cable.
3. Power Input Terminal (Dual Power): the camera accepts both AC 24V and DC 12 V power sources (non-polarity).
)

( )
110 - 230 V~
110 - 230 V~
1 3
2 4
4
6
1 3
1
2 4
3
2
not used
5