Troubleshooting Guide - UFESA PV36 Serie Instrucciones De Uso

ADVICE ON DISPOSAL:
Our goods come in optimised packaging. This basically
consists in using non-contaminating materials which
should be handed over to the local waste disposal
service as secondary raw materials.
This product complies with EU Directive 2012/19/UE.
The crossed wheelie bin symbol shown on the
appliance indicates that when it comes to dispose of
the product it must not be included in with household
refuse. It must be taken to a special refuse collection
point for electric and electronic appliances or returned to the
distributor when purchasing a similar appliance. Under current
TROUBLE SHOOTING GUIDE
Problem
The iron does not heat.
The pilot light does not
switch on.
The clothes tend to stick.
Water comes out together
with steam.
Steam does not come out.
Spray does not work.
Water comes out from
the soleplate before
connecting the iron.
Smoke comes out when
connecting the iron for the
first time.
If the above does not solve the problem, get in touch with authorized technical service.
You can download this manual from the local homepages of Ufesa.
Probable cause
1. Temperature control dial in very
low position.
2. No mains supply.
1. The iron is cooling.
2. The iron does not heat.
1. Very high temperature.
1. Temperature regulator in very low
position.
2. Steam regulator in very high
position with low temperature.
1. Steam regulator in closed position.
2. No water in the tank.
3. Obstructed mechanism.
4. The temperature is too low.
Anti-drip system activated.
1. No water in the tank.
2. Obstructed mechanism.
1. The steam regulator is not properly
closed.
1. Lubrication of some of the inner
parts..
refuse disposal regulations, users who fail to take discarded
appliances to special refuse collection points may be
penalised. Correct disposal of discarded appliances means
that they can be recycled and processed ecologically, helping
the environment and allowing materials used in the product to
be reused. For more information on available waste disposal
schemes contact your local refuse service or the shop where
the product was purchased. Manufacturers and importers are
responsible for ecological recycling, processing and disposal
of products, whether directly or via a public system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
Solution
1. Turn to a higher position.
2. Check with another appliance or plug the iron into a
different socket.
1. Wait until the heating cycle is completed.
2. See previous paragraph.
1. Turn the temperature dial to a lower temperature.
1. Turn the temperature dial regulator to a higher
position and wait until the pilot light switches off.
2. Turn the steam regulator to a lower position.
1. Turn the steam regulator to an open steam position.
2. Fill the tank.
3. Remove the needle and clean it, if this does not help,
contact the Technical Service.
4. Set a higher temperature if compatible with the
fabric.
1. Fill the tank.
2. Contact the Technical Service.
1. Make sure to place the steam regulator in position "0".
Do not forget to empty the tank when you have
finished ironing.
1. Do not worry. It will disappear in a short period of
time, after the first usage.