Temperature Control - Ariston Mgm II evo Instrucciones De Instalacion Y Uso

Ocultar thumbs Ver también para Mgm II evo:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
thermoregolation

Temperature control

Scenario no. 1: the boiler is equipped with a BUS BridgeNet®
connection
The boiler and the module communicate for optimised operation.
In this scenario, several types of temperature control are possible
depending on the confi guration and the installation's parameter set-
tings. Please refer to the boiler instructions.
It is advisable to check that the Active Regulation System (SRA or
temperature control) is active by ensuring that the "SRA" is displayed
on the boiler screen. If this is not shown, activate this function by pres-
sing the SRA key on the boiler. The water fl ow temperatures for each
of the zones can be perfectly adapted to the specifi cations of the ins-
tallations.
Scenario no. 2: the boiler does not have a BUS BridgeNet® connec-
tion
In this scenario, the module cannot perform temperature control.
The water fl ow temperature for Zone 1 is defi ned by the boiler setting.
For Zone 2, the module then controls the motorised mixing valve in
order to maintain a fi xed water fl ow temperature, as defi ned by para-
meter 502.
For Zone 3, the module then controls the motorised mixing valve in
order to maintain a fi xed water fl ow temperature, as defi ned by para-
meter 602.
GB
51

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mgm iii evo33186243318625

Tabla de contenido