Lcd Display; Working Mode - Riello HRT-177RS Manual De Instalacion Y Uso

EN
SYMBOL DESCRIPTION/FUNCTION
Heating mode is active (winter mode).
AUTO: the thermostat uses the pro-
grammed heating pattern (default or user
defi ned) to switch the heating ON & OFF at
preselected times.
OFF: the thermostat is set to have the
heating constantly OFF (in this mode the
default or user defi ned heating pattern is
ignored) – summer mode.
PARTY: the thermostat is set to provide
heating constantly ON (in this mode the
default or user defi ned heating pattern is
ignored). This status stay ON up to end
user switching OFF
ADVANCE: the pre-programmed heating
pattern is advanced to the next ON (or
OFF) period (this function can only be used
when the clock is in the AUTO mode)
Used to show current day of week

LCD DISPLAY

Used to show current time of day or ex-
planation inside the main menu
24-hour clock in 60 minute segments. Side
example: The heating fascia is OFF up to
15:59 and it is ON from 16:00 to 18:59
Used to show current room temperature or
desired temperature to be selected.
Batteries low
Heat request to the boiler (central heating
ON)
Other icons inside the main menu:
SYMBOL DESCRIPTION/FUNCTION
Economy temperature selection
Technical menu selection
(only for expertise)
Escape from main menu
QUICK START GUIDE
To be read and used after a proper installation has been made
and after the hours and the working mode has been set.
WORKING MODE: This central heating control device
provides you both the room thermostat function and the
weekly clock function.
When in AUTO mode, the central heating will be ON/OFF
14