Getting To Know Your Portable Air Carry Tank Like A Pro; Features; Glossary - Campbell Hausfeld ET200000 Manual De Instrucciones Y Lista De Piezas

Operating Instructions and Parts Manual
Getting To Know Your 2-in-1 Tank Like A Pro
Tank
Fill Valve
Double Check
Valve Hose
Assembly
Double Check
Valve Adapter
Plug
Figure 3 - components of the 2-in-1 Tank
Lifting Handles
Carry Handle
Tank Gauge
Safety Valve
Wall Mounting
Bracket
Twist Drain

Features

lIFTIng hanDlEs
The lifting handles are useful in placing
the tank on the wall and for removing
the tank from the wall.
carry hanDlE
The carry handle is useful in moving the
tank from location to location.
saFETy valvE
This valve automatically releases air if
the tank pressure exceeds the preset
maximum.
DoublE chEck valvE hosE
assEMbly
M8 x 70 mm
The double check valve ensures that
Lag Screws
the pressure inside the expansion tank
and the air compressor tank will remain
there and not leak out when the hose is
disconnected.
DoublE chEck valvE aDaPTEr
Plug
This unit comes with a special plug for
connecting any accessory item with
1/4 inch NPT threads. You will find
the adapter plug connected to the Air
Chuck (JB200900AV) and ready for your
inflation needs.
Wall MounTIng brackET
The wall mounting bracket is used for
attaching the tank to the wall. This part
Rubber
Feet of the product is permanently affixed to
the wall using the included lag screws.

Glossary

Become familiar with these terms
before operating the unit.
MAxIMUM AIR PRESSURE —
The maximum allowable pressure of
compressed air, as specified by the
manufacturer, for operating the unit.
psi (POUNDS PER SqUARE INCH) —
Measurement of the pressure exerted
by the force of the air. The actual psi
output is measured by a pressure
gauge on the compressor.
ET200000
7
www.chpower.com