Disassembly & Cleaning; Electrical Shock Hazard - Weston 82-0250-W Manual Del Usuario

DISASSEMBLY & CLEANING INSTRUCTIONS
!
WARNING
before cleaning, disassembling or assembling. Do not immerse cord,
plug or Main Body in water or other liquid.
time, thoroughly clean all parts (including
accessories) as instructed below. DO NOT
immerse the Main Body in water or other liquid.
1. Turn the Motor Unit off (
from the power supply.
2. Remove the Hopper from the Head.
3. To remove the Head, press the Head
Release Button and turn the Head clockwise
A).
(FIGURE
4. To remove the Head from the chute, press
back the two tabs to release the head(FIGURE
B).
5. Turn the Front Ring Nut counter-clockwise to
remove it from the Head.
6. Disassemble all the parts from the Head/
Screen Assembly.
7. NOTE: DO NOT immerse the Main Body in water
or other liquid. Clean the Main Body with a damp
cloth or towel then wipe dry. Wash all parts that
contact food in warm soapy water. Rinse with
clean water. Dry all parts immediately.
NOTE: Only plastic parts of the Tomato Strainer
are top-rack dishwasher safe.
8. Coat the Screen and Head with a food-grade
silicone spray.
8

ELECTRICAL SHOCK HAZARD:

) and disconnect it
Disconnect power
Head Release
Button
FIGURE A
FIGURE B
Tabs